Fein Slugger JHM Magforce X Instrucciones De Uso página 11

Filling the coolant container
(figure 4).
Prevent the flow of liquid
WARNING
along the cable into the
socket outlet or into the core drill unit, as
this can lead to electric shock. Tie a bow in
the cable near the plug, so that any liquid can
drip off.
Open the coolant bottle cap of the coolant
container.
Fill with water soluble cutting fluid like Slug-
ger Cutting Fluid.
Replace the cap back onto the coolant con-
tainer.
Do not use the magnetic core drill unit when
the cooling-lubricant system is defective.
Each time before operating, check for tight-
ness against leaks and for cracks in the hoses.
Prevent liquids from entering or penetrating
electrical components.
Coolant
container
en
Closing cap
11