Acta-Embrace supports have aluminum stays inserted in the cover,
which can be molded to meet the contour of the spine.
How to mold the aluminum stays:
1
To identify gaps or areas that require positioning adjustment, feel between the back support and the user's back.
Suggestion: To accommodate for rotation without having to rotate the entire back support, adjust the placement of the aluminum stays.
2
Unzip the top of the back support cover, and remove the aluminum stays.
3
Mold the aluminum stays using your hands and a firm surface to fill in any gaps and provide positioning.
4
Reinstall the aluminum stays, and then have the user rest against the back support.
5
Repeat the process, making adjustments until the proper support and positioning goals have been met.
6
Close the cover.
Suggestion: Aluminum stays can be re-molded for changes in condition and positioning needs over time.
Alternate Compass 4 Configurations
Each configuration provides 2" of depth adjustment.
Contact Information: Phone: 1.800.736.0925 Fax: 406.522.8563 Customer Support: orders.comfort@permobil.com
Note: "We," "Us" and "Our" refers to Permobil. "You" refers to the product purchaser or user.
Product information is changed as needed; current product information is available at permobilus.com.
ACTA-EMBRACE Operation Manual
1
2
Manufactured by The Comfort Companies, LLC, New Berlin, Wisconsin
Permobil
is a registered trademark of Permobil, Inc.
®
Compass
and Acta-Embrace
®
The Comfort Companies, LLC is a part of Permobil Seating and Positioning.
© 2018 Permobil
3
, are registered trademarks of Permobil.
®
3
4
1
Standard Configuration (as shipped)
2
Flipped Cane Clamp
Flipped Cane Clamp and Depth
3
Bracket
4
Flipped 90° Bracket and Cane Clamp
5
Flipped 90° Bracket
5