Combinations Of Guide Bars And Saw Chains; Stihl Msa 120 C, Msa 140 C - Stihl MSA 120 C Manual De Instrucciones

27 Combinations of Guide Bars and Saw Chains

27 Combinations of Guide Bars and Saw Chains

27.1 STIHL MSA 120 C, MSA 140 C

Pitch Drive link gauge/
Groove width
1/4" P 1,1 mm
The guide bar and saw chain combinations listed above meet the 45° computed kickback angle requirement of UL 60745-
2-13 (for Canada: CSA Z 62.3) when used on this model chain saw with the matching chain sprocket listed above.
Use replacement guide bars or saw chains only as listed above or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of UL 60745-2-13 (for Canada: CSA Z 62.3) when used on this model chain saw.
The listed guide bars are green-labeled reduced kickback STIHL guide bars. The listed saw chains are green-labeled low
kickback STIHL saw chains
Since new bar/chain combinations may be developed after publication of this manual, ask your authorized STIHL servicing
dealer for the latest STIHL recommendations.
0458-716-8621-D
Length Guide bar
10 in.
Rollomatic E Mini
(25 cm)
12 in.
Rollomatic E Mini
(30 cm)
Number of teeth Drive link
of sprocket count
56
8
64
English
Saw chain
71 PM3 (Type 3670)
59