Adjusting The Volume; Deleting Data - Hilti PS 250 Manual De Instrucciones

7.2.4.2 Adjusting the volume

Sets the volume level of the audible signal during scanning. Use the Arrow buttons to toggle between the various
options. Press the Confirm button to select the desired option and press the Cancel button to return to the settings
menu.
7.2.4.3 Setting the units
On systems with the item nos. 2044436, 2044474 and 377649 can the unit of measure used for scanning can be
configured by the user. Use the Arrow buttons to toggle between the various options. Press the Confirm button to
select the desired option and press the Cancel button to return to the settings menu.
Metric (mm or m, as appropriate)
Imperial (feet, as appropriate)

7.2.4.4 Deleting data

Deletes all scan data stored in the scanner. This function is available only if data is contained in memory. If data is
contained in memory, the bar shown next to the diskette symbol is filled. The bar is shown empty when no data is
contained in memory.
NOTE
Deleting memory contents presents a risk of losing data. Data that has not been transferred to the monitor before
deletion will be permanently lost.
en
15