Adding Oil To The Engine - Toro HoverPro 550 Machine Manual Del Operador

Figure 12
5. Secure the handlebar fitting to the upper
handlebar (Figure
inches) and locknut (1/4 inch).
Figure 13
1. Bolt (1/4 x 1-3/4 inches)
2. Upper handlebar
13) with the bolt (1/4 x 1-3/4
3. Handlebar fitting
4. Locknut (1/4 inch)
3

Adding Oil to the Engine

No Parts Required
Procedure
g367358
Important:
Your machine does not come with oil
in the engine. Before starting the engine, add oil
to the engine.
API Service Classification: SJ or higher
Oil Viscosity: 10W-30 oil
Oil Capacity: 0.40 L (13.5 oz)
1. Move the machine to a level surface.
2. Remove the dipstick from the oil-filler neck and
wipe the dipstick with a clean rag
g367354
3. Slowly pour the specified engine oil into the
oil-filler neck
8
(Figure
Figure 14
(Figure 15), and wait 3 minutes.
14).
g364715