Status Indicators; Battery Charge Status; Radio Icons - Motorola Solutions APX NEXT Guia Del Usuario

MN005642A01-AP
Chapter 5 : Home Screen
3 Tap Sign On, then enter the verification code generated by your device (if 2-factor
authentication is enabled).
NOTE:
You can request to resend the code to the connected device.
The code is 8 characters and can be alphanumeric.
4 Tap to complete the log in.
5.2

Status Indicators

This section explains the status indicators of the radio.
5.2.1

Battery Charge Status

Your radio indicates the battery charge status through LED, sounds, and the battery icon on the
display. You can also check the battery charge status by using the menu entry.
Battery Protection is activated when the battery is low or operating in extremely low temperatures to
extend radio communication. Features such as Wi-Fi and LTE are temporarily suspended.
When the Battery Protection Mode is active, you receive a notification. You can dismiss the Battery
Protect Mode notification by tapping Close on the dialog box. The top display will switch between
zones/channel information and Battery Protect Mode string.
Battery Protection Mode will end when the battery level or the temperature has returned to normal. A
notification will appear on the front display indicating that LTE and Wi-Fi services have been restored.
You can press Close to dismiss the notification or the dialog box will close itself after 3 minutes. The
top display notification will also disappear.
5.2.2

Radio Icons

These icons appear at the status bar to provide device-specific information or status.
Icon
(Front display)
(Top display)
(Front display)
36
Name
Battery
Bluetooth ® On
GPS
Description
Indicates the remaining battery level of the ra-
dio. The icon blinks when the battery level
drops to 10% or lower.
Steady – Bluetooth wireless technology is on
and ready for connection.
Inverted – Bluetooth link is established with an
external Bluetooth enabled device.
GPS is enabled and its signal is available.