Design And Functions; Sealing Process Sequence - Tecno-gaz TA009TAU Instrucciones De Uso

Design and functions

2.2
Mains connection with fuse

Sealing process sequence

2.2.1
Step 1:
After the sterilisation packaging has been inserted, the feed is automatically switched on.
Step 2: The sterilisation packaging is now transported and the area is heated to the set sealing
temperature.
Step 3:
The sealing seam, which is now heated, is pressed together by the sealing rollers and
sealed.
Step 4: The finished sterilization packaging is transported to the extraction side.
Step 5: If no item to be sealed is fed in, the feed switches off after approximately 30 seconds.
9.696.160
TecnoSeal TA009TAU Chapter 2
Page 8
Controller
Sealing edge adjustment
V 1.01