Schedule Cleaning; Select A Cleaning Mode - EUFY RoboVac L70 Hybrid Manual Del Propietário

Tabla de contenido

Idiomas disponibles

English

• The Wi-Fi status light on RoboVac is slowly flashing blue.

• RoboVac is attached to the Charging Base to ensure it has enough power during setup.

EufyHome

1. Download the EufyHome app from the App Store (iOS devices) or Google Play (Android

devices).

2. Open the app and create a user account.

3. Tap the "+" icon to add RoboVac to your EufyHome account.

4. Follow the instructions in the app to set up the Wi-Fi connection.

After connecting successfully, you can control RoboVac via the app.

With the app, you can select cleaning at your desired suction level, schedule cleaning,

view the cleaning map, set up "No-Mop" or "No-Go" zones, check the network

connection status, and access additional features.

Wi-Fi Status Light

Slowly flashing blue

Rapidly flashing blue

Solid blue

• If you have any problems during the Wi-Fi setup process, refer to the

"Troubleshooting > Wi-Fi connection" section in this Manual.

• If RoboVac gets stuck in any space, tap Find My Robot in the app to find the

machine. This function is available in the app only.

Reset the Wi-Fi Connection

Press and hold

and

simultaneously for 3 seconds to reset the Wi-Fi connection if

necessary.

You will hear a voice prompt when the Wi-Fi connection has been reset, and the Wi-Fi

status light will slowly flash blue. Now you can follow the Wi-Fi instructions in the

eufyHome app to set up the Wi-Fi connection.

Waiting for connection

Connecting with your wireless router

Connected with your wireless router