Select A Cleaning Mode; Spot Cleaning Mode; Select A Suction Power Level - EUFY RoboVac G20 Hybrid Manual Del Usuario

Select a Cleaning Mode

Auto Cleaning Mode
After startup, RoboVac moves from the Charging Base and automatically determines
its cleaning route, following a bow-shaped cleaning method. When the entire clean is
finished, RoboVac automatically returns to the Charging Base.
Press to start cleaning in Auto cleaning mode.
18 EN
• During cleaning, RoboVac will return to the Charging Base automatically
if the battery level becomes low. Once recharged, RoboVac will resume
to finish the remaining cleaning.
• By default, RoboVac starts in Auto cleaning mode when it is turned on.

Spot Cleaning Mode

You can select the Spot cleaning mode in the EufyHome app. In this mode, RoboVac
intensively cleans a specific area for 2 minutes in a spiral pattern, useful if there is a
concentrated area of dust or debris.
EufyHome

Select a Suction Power Level

In the EufyHome app, select a suction power level according to your needs:
• Quiet
• Standard (Default)
• Turbo
• Max
When RoboVac starts cleaning the next time, it will clean according to the
suction power level you previously selected.
EN 19