Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
en-US
We also recommend emptying and
cleaning the fine dust container once or
twice a year (see "Frequently asked
questions – Cleaning the fine dust filter
manually").
Replacing the thread catchers
(figs. 28 + 29)
(only possible for models with an ad-
justable floorhead included as standard)
The thread catchers on the suction inlet
to the floorhead can be replaced. Re-
place the thread catchers if the pile has
worn down.
Lift the thread catchers from the
slots. To do so use a suitable tool,
e.g., a flat-head screwdriver.
Install new thread catchers.
Replacement parts are available from
your Miele dealer or through Miele
Service.
20
Cleaning and care
Risk of electric shock from volt-
age.
The supply voltage is applied to the
appliance even if it is switched off.
Before cleaning, unplug the appli-
ance from the electrical socket.
Vacuum cleaner and accessories
Risk of electric shock from volt-
age.
If moisture gets into the vacuum
cleaner, there is a risk of electric
shock.
Do not let the vacuum cleaner get
wet.
Follow the special cleaning instruc-
tions for the dust container and filter
frame in "Maintenance" and for the
fine dust filter, the pre-filter, and the
fine dust container in "Frequently
asked questions".
The vacuum cleaner and all plastic ac-
cessories can be cleaned with a com-
mercially available cleaner suitable for
plastic.
Damage due to unsuitable clean-
ing agents.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discolor
the external surfaces.
Do not use abrasive cleaning agents,
glass cleaning agents, all-purpose
cleaners, or oil-based conditioning
agents.
Publicidad
Tabla de contenido
