Hitachi RAS-18YH4 Manual De Instrucciones página 13

2 3
Set the
(TIME) button. the TIMER control button.
AM
PM
Example: The current time is 1:30p.m.
2
Set the turn-off time with
the TIMER control button.
PM
2
Set the turn-on time with
the TIMER control button.
AM
4
Set the turn-on time with
the TIMER control button.
PM
AM
• The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the
current time at first because it serves as a reference.
• As the time settings are stored in memory in the remote controller, you only have to press the
(RESERVE) button is order to use the same settings next time.
All manuals and user guides at all-guides.com
4
Set the current time with
button again. The time
indication star ts lighting
instead of flashing.
PM
3
Point the signal window of the remote controller toward the indoor unit,
and press the (RESERVE) button.
The (OFF) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
PM
3
Point the signal window of the remote controller toward the indoor unit,
and press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
AM
5
Point the signal window of the remote controller toward the indoor unit,
and press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the
PM
AM
– 13 –
Press the (TIME)
• The time indication will
• To check the current time
PM
(TIMER) lamp lights on the indoor unit.
Example: The device will turn off at 11:00p.m.
The setting of turn-off time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn on early so that the preset
temperature be almost reached at 7:00 a.m.
The setting of the turn-on time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
For heating, the device will turn off at 10:30 p.m.,
and then turn on early so that the preset
temperature be almost reached at 7:00 a.m.;
for cooling and dehumidifying, it will simply
turned on at 7:00 a.m. The settings of the turn
on/off times are now complete.
disappear automatically in 10
seconds.
setting, press the (TIME)
button twice.
The setting of the current
time is now complete.
(RESERVED)
(RESERVED)
(RESERVED)