TECNOMOTOR TM 514 Manual De Instrucciones página 241

Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar tecnomotor@tecnomotor.com.br
Error
209
Code
Probable Cause
- Accumulation of impurities in the hydraulic
system.
- Bad contact at the drain valve connections.
- Drain valve o-ring broken.
Error
210
Code
Probable Cause
- Accumulation of impurities in the hydraulic
system.
- Bad contact at the drain valve connections.
- Drain valve o-ring broken.
Error
211
Code
Probable Cause
- 'Opt_sampling' remote configuration
parameter less than 99.
Error
212
Code
Probable Cause
- 'Opt_sampling' remote configuration
parameter less than 99.
Error
213
Code
Probable Cause
- Fluid was not changed within the specified
time.
- Fluid contamination.
- Remote configuration parameter "Opacity"
less than 25.
Error
255
Code
Probable Cause
- User pressed the "RET." key during a test
process.
TM 514 – COMMON RAIL TEST
Leakage in the drain valve CH1
- Contact the manufacturer.
Leakage in the drain valve CH2
- Contact the manufacturer.
CH1 data storage exceeded
- Contact the manufacturer.
CH2 data storage exceeded
- Contact the manufacturer.
Contaminated fluid
- Change the fluid.
Process stop requested by user.
- Restart the process.
239
Solution
Solution
Solution
Solution
Solution
Solution