Function Of The Unit; Overview (A); Operating Instructions; Putting Into Operation - Rothenberger ROWELD P 160 Saniline Instrucciones De Uso

Sound power level dB (A) L
Heating element:
Power supply .............................................. 230 V a.c. .........110-120 V a.c.
Heating plate diameter (mm) ....................... 200 ...................200
Weight (kg) ................................................. 3,14 .......................
Weights:
Complete machine (kg) ............................... 34,0 .......................
P160 Saniline with skid frame (kg) .............. 48,6 .......................
Dimensions: (LxWxH):
P160 Saniline swivelled in (mm) ................. 715 x 430 x 735
swivelled out (work position) (mm) .............. 715 x 680 x 1180
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
3

Function of the Unit

3.1

Overview (A)

Trimmer unit
1
Heating element
2
Machine housing
3
Movable table
4
Clamping lever
5
Grip bar
6
Welded joints for house installations, chimney renovations and roof drainage systems made of
PE, PVDF and PP pipes with outer diameters of 40 - 160mm can be safely produced with the
machine.
Depending on the version clamping elements can be used instead of the support forks for the
exterior clamping positions. Threads are provided for this purpose in the machine base and in
the movable table.
3.2

Operating instructions

In accordance with national or EU ordinances and guidelines, e. g. DVS 2212, Section I,
only duly qualified and authorized personnel are allowed to operate the ROWELD welding
machines!
Only trained and authorized welders are allowed to operate the machine!
3.2.1

Putting into operation

Please read through the operating instructions and safety instructions attentively before
you put the butt fusion welding machine into operation!
Do not use the heating element in explosive environments or bring it into contact with
easily flammable materials!
 Put the machine on a level, solid surface.
 Pull the knob (11), swing the machine upward, and allow the locking bolts to click in.
Make sure that both bolts are engaged in the holes in the frame!
 Pull the trimmer lock (7) to the front and swivel the trimmer (1) to the back.
 Swivel heating element (2) to the back.
 Connect power plug of trimmer unit (1) and heating element (2) to the power supply stated
on the type plate.
¦ K ............ 104 ¦ 3 ...................
WA WA
50/60 Hz ...........50/60 Hz
800 W ..............800 W
Safety catch
7
Main clamp
8
Adjusting nut
8.1
Tensioning screw
8.2
Support brackets
10
Knob
11
ENGLISH
93 ¦ 3
3,14
34,0
48,6
13