DJI CHX162-30 Guia Del Usuario página 3

EN
Carefully read this entire document and all safe and lawful practices provided before use.
Place the charging hub on a flat and stable surface when in use. Make sure the device is
properly insulated to prevent fire hazards.
DO NOT attempt to touch the metal terminals on the hub. Clean the metal terminals with a clean,
dry cloth if there is any noticeable buildup.
Overview
4
Usage
DJI Mini 3 Pro Two-Way Charging Hub can be used in the following scenarios:
1. Charging Intelligent Flight Battery (Figure A1)
Insert the battery into the battery port until there is a click and connect the charging hub to a power
2
1. USB Port
Connect and charge external devices such as a remote
controller or mobile phone.
2. Power Port (USB-C
Connect to a charger. Recommend to use USB Power Delivery
charger.
3. Function Button
Press to check the battery power level. Press and hold the
function button for two seconds to switch the charging priority.
4. Status LED
The status LEDs display battery levels for three seconds after
the batteries are inserted into the charging hub.
The LEDs in an array blink successively during charging. The
slower the LEDs blink, the slower the charging speed. It is
recommended to use a USB Power Delivery charger and cable
3 2 1
for fast charging. The LEDs in an array change to solid green
after the corresponding battery is fully charged.
The LEDs status and description is the same as the one for the
battery level LEDs on the aircraft. Refer to the DJI
User Manual for more information.
® )
TM Mini 3 Pro