DJI CHX162-30 Guia Del Usuario página 4

outlet. The Intelligent Flight Battery with the highest power level will be charged first and the rest will
be charged in sequence according to their power levels. After the battery is fully charged and the
corresponding LEDs change to solid green, remove the battery from the charging hub as shown in
Figure A2.
2. Using Intelligent Flight Batteries as Power Banks (Figure B)
Insert the Intelligent Flight Battery into the charging hub without connecting the hub to a charger, then connect
any external device to the USB port to charge the device. The Intelligent Flight Battery with the lowest power
level will be discharged first and the rest in sequence according to their power levels. The status LEDs will
display the power level of the battery that supplies power when the external device is being charged.
Press the function button to activate charging if charging does not start automatically.
3. Switching Devices to Charge (Figure C)
When both the intelligent flight battery and an external device are connected for charging, the battery will
be charged before the external device.
Press and hold the function button on the charging hub for two seconds to prioritize charging external
devices. Charge for Intelligent Flight Batteries will be continued after the external device is fully charged
or it has been charged for 4 hours. When charging an external device, press and hold the function button
for two seconds to switch back to charging Intelligent Flight Batteries.
The charging hub may not be able to detect whether the device is fully charged when charging
an external device with a high standby power consumption such as a smartphone or tablet.
In this case, charging will not switch to Intelligent Flight Batteries until the external device is
charged for four hours. Users can manually switch the charging priority by pressing and holding
the function button for two seconds.
When the input of the charging hub is lower than 5V/2A, there is a possibility that the USB port
will be unable to charge the external devices.
Specifications
Model Number
Supported Charger
Supported DJI Battery
Input
Output (USB)
Operating Temperature
CHX162-30
USB Power Delivery charger
DJI Mini 3 Pro Intelligent Flight Battery (BWX162-2453-7.38)
DJI Mini 3 Pro Intelligent Flight Battery Plus (BWX162-3850-7.38)
5V 3A，9V 3A，12V
5V 2A
5° to 40° C (41° to 104° F)
3A
3