Commissioning And Operation; Before Startup - Kärcher A 2206 X Manual De Instrucciones

Ocultar thumbs Ver también para A 2206 X:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23

Commissioning and operation

Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport
damages please contact your dealer.
The basic suction device is mounted on
a chassis and can be detached, for e.g.
for emptying or for transporting in a car.
Note: Please refer to page 2 for figures of
the appliance and the operation.
Illustration
1 Chassis with wheels and castors
2 Transport handle; height can be adjust-
ed in two phases
3 Accessory mount
4 Unlock basic suction device
5 Container
6 Parking brake
7 Motor casing
8 Carrying handle
9 Blowing connection
10 Air regulation of the blowing function
11 ON/OFF switch for appliance
12 Power cord with plug
13 Storage, power cord
14 Suction hose connection
Accessories
15 Suction hose
16 Suction tubes 2 x 0.5 m
17 Floor nozzle with hard surface insert
18 Crevice nozzle
19 Filter bag
8
English
All manuals and user guides at all-guides.com
Illustration
Illustration
Illustration
Illustration
Illustration
See diagram 11
For a dust-free disposal of the vacuuming
material we recommend to insert the paper
filter bag as well. This provides the addition-
al advantage that the cartridge filter will not
become contaminated that quickly.

Before Startup

Before commissioning, it is necessary to
install the steering rollers, the handle and
the wheels with axis on the chassis.
The chassis needs to be assembled
only once; instructions for the same
are described on an enclosed sheet.
Start up
Connect accessories.
Plug in the main plug.
Switch on the appliance using the ON/
OFF switch.
To move the device, first place one foot
on the ground, hold it and pull the trans-
port handle backwards.
Operations
Always work with an inserted car-
tridge filter - during wet as well as dry
vacuum cleaning!
Dry vacuum cleaning
Work only with a dry cartridge filter!
Therefore: Always let the cartridge filter
dry thoroughly before using it!
Added filter bags can burst!
Therefore: Change the filter bag at the
appropriate time!
Always use a filter bag while sucking
in fine dust!
The filling level of the filter bag depends
on the dirt that is sucked in.

Publicidad

Tabla de contenido
loading

Tabla de contenido