VALBERG WF 814 B AID DG 701T Instrucciones De Uso página 13

B
Using the appliance
Additional Functions
1. Temperature Selection
Use the washing water temperature adjustment button to alter the automatically programmed
washing water temperature.
When you select a programme the maximum temperature for that programme is automatically
selected. To adjust the temperature, press the water temperature adjustment button until
the desired temperature is displayed on the digital display.
You can gradually decrease the washing water temperature between the maximum washing
water temperature of the selected programme and cold washing (- - C) selections by pressing
the temperature adjustment button.
2. Spin Speed Selection
When you select a programme, the maximum spin speed is automatically selected.
To adjust the spin speed between the maximum spin speed and the cancel spinning
option (- - -), press the Spin speed button until the desired speed is displayed.
If you have skipped the spin speed you want to set, keep pressing the spin speed adjustment
button until the desired spin speed is displayed again.
22 EN
B
Using the appliance
3. Delay Timer
You can use this auxiliary function to delay the start time of the washing cycle for 1 to 23 hours .
To use the delay function:
• Press the delay key once.
• "01h" will be displayed. will light up on the electronic display.
• Press the delay key until you reach the time after which you want the machine to start
the washing cycle.
• If you have skipped the delay time you would like to set, you can keep pressing the delay
key until you reach that time again.
• To use the time delay function, you need to press the Start/Pause key to start the machine.
• If you want to cancel the delay:
- If you have pressed the Start/Pause key to start the machine, you just need to press the
delay key once. will go off on the electronic display.
- If you have not pressed the Start/Pause key, press the delay key continuously until
goes off on the electronic display. will go off on the electronic display.
NOTE
In the case that you want to select the auxiliary function
feature, if the auxiliary function LED is not on, this
means that this feature is not being used in the washing
programme you have selected.
23 EN