APRILIA eSR1 Manual Del Usuario página 24

CAUTION
Zero Start Function: the throttle is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.
• When riding the item, tilt your body in the direction of travel when turning and slowly turn
the handlebar.
• To stop the item, release the throttle, pull the brake lever
• To get off, first stop the item completely. Getting off the moving item can cause injury.
• Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for
recommended value), wheel wear, throttle and charge status of battery.
Brake lever adjustment
eSR2 / eSR2 EVO
It is possible to adjust the position of the brake
lever, if necessary, by unscrewing the screw (A).
Once the position has been adjusted, tighten the
screw (A).
eSRZ
eSR1
A
It is possible to adjust the position of the brake
lever, if necessary, by unscrewing the screw (A).
Once the position has been adjusted, tighten the
screw (A).
The brake lever can be adjusted when needed
by unscrewing the screw located underneath (A).
Once the position has been adjusted, tighten the
screw (A).
23
A