Neighbour Networks; Lan; Status; Ipv4/Ipv6 Configuration - Devolo WiFi 6Repeater 3000 Manual

45 Network configuration

4.5.9Neighbour networks

The Neighbour networks area displays visible
wireless networks in your surroundings.

4.6 LAN

You make changes to the network settings in the
LAN area.

4.6.1Status

You can see the current LAN status of the
WiFi 6 Repeater 3000 here. The Ethernet area
shows the network devices connected to the net-
work connector Port 1 (e.g. PC, NAS, etc.).
IPv4/IPv6
Depending on how the WiFi 6 Repeater 3000 is
connected to the Internet (IPv4 or IPv6), current
network information is displayed, such as Address,
devolo WiFi 6 Repeater 3000
Subnet mask, Standard gateway and DNS ser-
ver..

4.6.2 IPv4/IPv6 configuration

In the factory default settings, only the Retrieve
network settings from a DHCP server option for
IPv4 is enabled. This means that the IPv4 address is
retrieved automatically from a DHCP server. The
currently assigned network data are visible (greyed
out).