Reset Button; Ethernet Port; Wi-Fi Antennas - Devolo WiFi 6Repeater 3000 Manual

21 Introduction

2.2.3Reset button

The Reset button (in the recess next to the Add
button) has two different functions:
Restart
The device restarts if you press the Reset button for
less than 10 seconds using a paper clip or similar
object.
Factory default settings
1
To remove the WiFi 6 Repeater 3000 from your
network and successfully restore factory
defaults for its entire configuration, press the
Reset button for longer than 10 seconds using
a paper clip or similar object.
Keep in mind that all settings that have al-
ready been made will be lost!
2
Wait for the dot in the Wi-Fi symbol to stay lit
green and then disconnect the device from the
power grid.
The WiFi 6 Repeater 3000 has been suc-
cessfully removed from your existing net-
work.
devolo WiFi 6 Repeater 3000

2.2.4 Ethernet port

Using the Ethernet
WiFi 6 Repeater 3000, you can connect it to sta-
tionary clients (computers, game consoles, etc.)
with a commercially available network cable.
Only use a network cable to connect "new
clients" to the WiFi 6 Repeater 3000 if they
are not already integrated into your home
network via Wi-Fi. Duplicate connections
disrupt the network.

2.2.5 Wi-Fi antennas

The internal Wi-Fi antennas are for connecting to
other network devices wirelessly.
port of the