Firmware; Config Sync - Devolo WiFi 6Repeater 3000 Manual

49 Network configuration
for creating a variety of configurations that will let
you quickly and easily set up the device for use in
different network environments.
Reboot device
In order to reboot the WiFi 6 Repeater 3000, select
the Reboot button in the System
on area.

4.7.4Firmware

The firmware of the WiFi 6 Repeater 3000 includes
the software for operating the device. If necessary,
devolo offers new versions on the Internet as a file
download, for example to modify existing functi-
ons.
Current firmware
The currently
WiFi 6 Repeater 3000 is displayed here.
Searching for and updating firmware
automatically
The adapter can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
devolo WiFi 6 Repeater 3000

Configurati-
installed firmware of
The WiFi 6 Repeater 3000 lets you know
when a new firmware version becomes
available. The option is enabled by default.
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The WiFi 6 Repeater 3000 automatically up-
dates its firmware. The option is enabled by
default.
Download updated firmware
1
If you have downloaded an updated firm-
ware file for the WiFi 6 Repeater 3000 to
your computer, navigate to the System

Firmware Update firmware area. Click
Browse ... and select the downloaded file.
the
2
Confirm the update procedure with Update
firmware. After a successful update, the
WiFi 6 Repeater 3000 restarts automatically.
Ensure that the update procedure is not inter-
rupted.

4.7.5 Config Sync

This menu is available in access point mode
only.
