Initial Use; Package Contents; System Requirements - Devolo WiFi 6Repeater 3000 Manual

3 Initial use

This chapter covers everything you need to know
to set up and use your WiFi 6 Repeater 3000. We
describe how to connect the device and briefly de-
scribe the devolo software. Additional detailed in-
formation is available at www.devolo.global.

3.1 Package contents

Please ensure that the delivery is complete before
beginning the installation
Repeater 3000:
b
1 WiFi 6 Repeater 3000
b
Hard copy of installation guide
b
"Safety and Service" printed flyer
b
Simplified CE declaration
devolo AG reserves the right to change the pack-
age contents without prior notice.

3.2 System requirements

The following system requirements are relevant if
you are configuring/managing
Repeater 3000 using a computer/laptop.
b
Supported
devolo Cockpit:
a
a
a
b
Network connection
of your WiFi 6
3.3 Installing WiFi 6
In the following sections, we describe how to con-
nect the WiFi 6 Repeater 3000 and integrate it
into your Wi-Fi network.
the WiFi 6
operating systems
Win 7 (32-bit/64-bit) or later
Ubuntu 14.04 (32-bit/64-bit) or later
Mac OS X 10.9 or later
Please note that your computer or laptop
must have a network card or network
adapter with a network interface.
Repeater 3000
CAUTION! Damage to the device caused
by ambient conditions
Only use device indoors in dry conditions
For the permitted voltage range for operat-
ing the device and the power consumption,
refer to the type plate on the rear of the de-
vice. For additional technical data on our
products, refer to the product area at
www.devolo.global.
devolo WiFi 6 Repeater 3000
Initial use 22
of the