Network Configuration; Calling Up The Built-In Web Interface; General Information About The Menu - Devolo WiFi 6Repeater 3000 Manual

4 Network configuration

The WiFi 6 Repeater 3000 has a built-in web inter-
face that can be called up using a standard web
browser. All settings for operating the device can
be modified here.
4.1 Calling up the built-in web
interface
You can access the built-in online web interface for
the WiFi 6 Repeater 3000 in different ways:
b
Use a web browser on your terminal device to
call up the address http://2.2.2.1.
For the initial
WiFi 6 Repeater 3000 sets up a temporary
Wi-Fi network
"devolo WiFi 6 Repeater 3000", which has
no Internet connection. Connect to this net-
work with your terminal device (no
password is required).
The WiFi 6 Repeater 3000 should be in fac-
tory default condition (for more informa-
tion, refer to 2.2.3 Reset button).
or
b
Using the devolo Home Network App on your
smartphone or tablet, you can access the
device's web interface.
or
b
Using the Cockpit software, you can get to the
device's web interface by clicking on the corre-
sponding tab for the WiFi 6 Repeater 3000.
Then the program determines the current IP
address and starts the configuration in the web
browser.
set-up, the
4.2 General information about
called
the menu
All menu functions are described in the correspon-
ding interface as well as in the associated chapter
in the manual. The sequence of the description in
the manual follows the structure of the menu. The
figures for the device interface serve as examples.
Repeater or access point
Menu pages that are only displayed in one mode
are marked with a note.
Network configuration 30
You can find more
devolo Home Network App
software in Chapter 3.4 Installation of de-
volo software.
devolo WiFi 6 Repeater 3000
information on
and Cockpit