Securing Child - Joie i-Juva Manual De Instrucciones

Ocultar thumbs Ver también para i-Juva:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
8. To remove the base, press the
-1
secondary lock button
14
-2
and then the button
on the
14
ISOFIX connectors before
removing the base from the vehicle
seat.
14
9. Press the ISOFIX releasing button
to fold the ISOFIX.
15
Head Support and Shoulder
Harnesses
see images
16
Check that Shoulder Harness Straps
are set at the proper height.
!
The bottom of headrest must be
level with the highest point of
child's shoulder, it is shown as
!
If the Shoulder Harness Straps are
not at proper height, the child
might be ejected from the
enhanced child restraint if there is
a crash.
11
14
first
2
15
2
1
16
16

Securing Child

in the Enhanced Child Restraint
see images
Note
1
2
1. While pressing the harness
adjustment button, pull completely
the two shoulder harnesses of the
enhanced child restraint.
-
17
21
Always use the head support when the
baby sitting in the infant carrier module.
We recommend using the cushion to
increase side impact protection
while the baby is under 60cm, and
removing the cushion when the infant's
shoulders no longer fit comfortably.
17
17
12

Publicidad

Tabla de contenido
loading

Tabla de contenido