Securing Your Child In The Child Restraint - Joie every stage Manual De Instrucciones

Correctly assembled vehicle belt is shown as
!
Waist belt passes through the seat slots , as
!
Shoulder belt must passes through the shoulder-belt slots, as
!
The vehicle buckle tongue is engaged with the buckle correctly,
-3
as
15
15
ii. Securing your Child in the Child Restraint
Use Infant Insert
Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend using the full
infant insert while the baby
is 0-9 months or until they
outgrow the insert. The infant
insert increases side impact
protection.
11
15
-1
15
-2
15
3
Remove the head support
portion of the infant
insert when the child's
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the infant's
shoulders no longer fit
comfortably.
Remove the infant insert
1
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The
cushion can be used
2
separately without being
attached to the insert to
bolster the infant's back
for more comfort.
1. While pressing the harness
adjustment button, pull completely
the two shoulder harnesses of the
child restraint.
2
2. Press the red button to disengage
the buckle.
3. Place the child in the child restraint
and pass both arms through the
harnesses.
4. Engage the buckle.
18
16
16
17
17
18
12