Securing Child - Joie gemm Manual De Instrucciones

4. Reassemble the harness ends
onto the junction plate.
!
Thread the shoulder strap
through the shoulder
harness anchor. -1
12
!
The shoulder harnesses
must be placed in back of
the two iron tubes.
!
During adjustment, make
sure the shoulder harnesses
are not twisted.
!
Use extreme care in
threading the shoulder
harnesses according to the
figure. If the shoulder
harnesses are not secure,
they will not protect your
baby properly.

Securing Child

Restraint
see images -
13 20
Note
1. Insert is for infant's
protection. Infant weighing
under 10kg must use the
insert A or B.
2. Before using the insert A,
please assemble foam.
3. After child is placed into the
seat, check whether the
shoulder harnesses are at
proper height.
11
All manuals and user guides at all-guides.com
12
12
1
in the Infant Child
13
13
1. While pressing the harness
adjustment button, pull
completely the two shoulder
harnesses of the infant child
restraint.
14
2. Unlock the buckle of the
harnesses by pressing the red
button.
15
3. There are 2 positions crotch
harness adjusted according to
different requirements.
Position 1 Smaller babies use
this position
16
Position 2 Larger babies use
this position
16
14
15
16
-1
-2
1
2
12