Web App. Account Creation; Rear Wheel Removal And Installation; Rear Wheel Removal - MAHLE X20 System Guia Del Usuario

MAHLE X20 System · Service
022
V.1.0.1 - 04/2022

5.2.2. Web APP. Account creation

Use the same username and password as you are using
for the smart device applications to access the web
application.
6. Servicing
All components of the X20 System are fully replaceable.
Please be aware that some parts can only be changed or
handled by an authorized MAHLE service partner or
dealer.
Components such as the rear wheel can be changed or
replaced by the end user directly. To ensure that you will
not injure yourself or damage the components please
follow some basic guidelines.
WARNING
If servicing is required, please remember at all times that
this can only be performed by a professional mechanic.
eBike components include electronic components and
connections that need to be installed correctly . Misuse of
batteries or other components may cause serious injuries
or damage to the components.

6.1. Rear wheel removal and installation

Should you need to remove the rear wheel for servicing or
replacement, please read the following paragraph
carefully.
The rear wheel includes the X20 Drive which does not
have direct wire connection. It features an automatic
connection which needs to be taken care of when
installing or removing the rear wheel. Please follow the
steps below.

6.1.1. Rear wheel removal

1. If you run a single speed setup, please continue with
step 3.
2. If you run a cassette, downshift to the smallest
sprocket.
3. Loosen your axle and disassemble it.
4. Slide the wheel out of the frame. Ensure you give room
to the wheel by pressing the rear derailleur away from the
cassette.
Trinity pic
5. Ensure to not damage the frame with the disc rotor
when sliding the wheel out of the frame