Specific Safety Advice; Roller Shutter - SOMFY ilmo2 50 S WT Guia De Instalacion

ilmo 50 S WT
2.2.2 S tubular module
1) Never submerge the S tubular module in liquid.
2) Avoid impacts.
3) Do not drop it.
4) Never pierce the S tubular module.
5) Never use the S tubular module without the
ilmo2 WT module. These two components are
inseparable and cannot operate independently
from each other.

2.3 Specific safety advice

2.3.1 Roller shutter

Check the strength of the roller shutter and its
-
fittings.
The roller shutter must be fitted with:
• end stops screwed into the last slat, fixed
(A) or removable (B) stops incorporated in the
runners or an end slat acting as an end stop,
• bolts or rigid links (C).
Check that the motor used is suitable for the
-
size of roller shutter, to avoid the risk of dama-
ging the roller shutter and/or the Somfy product.
Caution: For information about the compatibility of
the motor with the roller shutter and accessories,
contact the roller shutter manufacturer or Somfy.
40
Copyright © 2008 - 2017 Somfy Activités Société Anonyme. All rights reserved.
Installation guide
1 2
3 4
C
A
B