Mettler Toledo SevenDirect SD30 Manual De Usuario página 29

* For this parameter, resolution is automatically adjusted based on the measured value. A maximum of 6 digits
is displayed.
SevenDirect™ SD30
Resolution Conductivity
TDS
Salinity
Resistivity
Conductivity Temperature
Accuracy Conductivity
TDS
Salinity
Resistivity
Temperature
Input Mini-DIN
Calibration Calibration points
Predefined conductivity standards
User-defined conductivity standards 10
Manual cell constant entry
0.1/0.01/0.001* (µS/cm, mS/cm)
0.1/0.01/0.001/0.0001* (µS/m,
mS/m, S/m)
0.1/0.01/0.001 (mg/L, ppm)*
0.1/0.01/0.001/0.0001 (g/L,
ppt)*
0.1/0.01
0.1/0.01/0.001 (Ω·cm, kΩ·cm)*
0.1/0.01 (MΩ·cm)
0.1 °C
±0.5% of measured value
±0.5% of measured value
±0.5% of measured value
±0.5% of measured value
± 0.1 °C (0.0...100.0 °C)
± 0.3 °C (< 0.0 °C or > 100.0 °C)
1...2
4
Yes
19