Tabla de contenido
Publicidad
Menu item
Description
[EN]
[DE]
Activate the interval flush
• User-controlled: A flush is
actuated at the end of the [flush
interval] (menu item 41), whereby
the flush interval is restarted with
every use. The flush time is
determined by the [ flush time]
(menu item 46) value.
• Interval-controlled: A flush is
actuated at the end of the [flush
interval] (menu item 41),
34
regardless of the number of uses.
[IntFlushM]
The flush time is determined by
[IntFlushM]
the [ flush time] (menu item 46)
value.
• Difference flush: A flush is
actuated at the end of the [flush
interval] (menu item 41),
regardless of the number of uses.
If flushes have already been
performed within the [flush
interval], the postflush only
makes up the difference in [flush
time] (menu item 46).
Light mode
• Off: The actuator button
illumination always remains off
and does not turn on even when
a person approaches the WC.
• On: The actuator button
35
illumination always remains on,
[LightMode]
even when a person steps back
[LightMode]
from the WC and leaves the
room.
• Automatic: The actuator button
illumination turns on when a
person approaches the WC and
turns off when the person leaves.
9753440651 © 04-2022
970.779.00.0(00)
Application
• To fill the trap in the
case of low user
frequencies
• To flush out standing
water in the pipe
(hygiene function – to
prevent stagnation)
–
Value
Factory
setting
[0] = Off
[1] = User-
controlled
[2] = Interval-
[1]
controlled
[3] = Diffe-
rence flush
[0] = Off
[1] = On
[2]
[2] = Auto-
matic
3 / 5
EN
39
Publicidad
Tabla de contenido
