geberit SIGMA80 Instructions De Montage página 49

Menu item Description
[EN]
[DE]
Delay time until lighting on
47 Length of time for which a person
[T LightOn]
must remain in the proximity
[T LightOn]
detection range until the actuator
button illumination switches on.
Afterglow time
48
The actuator button illumination
[RunOnTime]
remains lit for the length of time
[NachlaufZ] entered once the user has left the
proximity detection range.
Light colour
49
[Color]
The light colour of the actuator
[Color]
button illumination can be selected.
Proximity detection range
50
Defines the distance at which a
[RngPresen] person is detected. The actuator
[RngPresen] button illumination turns on when a
person is detected.
Detection distance for manual
51 flush actuation
[RngManual]
Defines the distance at which a
[RngManual]
hand is detected for flush
actuation.
Sensor for detection range
The detection range of the sensors
can be tested using the [Test
detection range] (menu item 22)
function. The active sensor is
selected here.
• Proximity detection: The sensor
for the proximity detection range
is activated.
52
Red = User movement in the
[SensorSel]
detection range.
[SensorSel]
• User recognition: The sensor for
the user recognition detection
range is activated.
Red = User detected
Green = Standing user detected
Blue = Seated user detected
• Manual flush actuation: The
sensor for the manual flush
detection range is activated.
Red = Hand detected.
9753440651 © 04-2022
970.779.00.0(00)
Application
• To prevent the actuator
button illumination from
switching on due to
people passing by
–
–
–
–
• To check the user
recognition
Value Factory
setting
[1–30]
[1] = 1 s
[1]
[10] = 5 s
[30] = 15 s
1–20 s 2 s
[0] = Blue
[1] = Tur-
quoise
[0]
[2] = Magenta
[3] = Orange
[4] = Gelb
[0–4]
[0] = Short
[2]
[2] = Medium
[4] = Long
[0–4]
[0] = Short
[2]
[2] = Medium
[4] = Long
[0] = User
recognition
[1] = Manual
[0]
flush actuation
[2] = Proximity
detection
5 / 5
EN
41