Description And Installation; Before Use - Medela Trolley Instrucciones De Uso

3 Description and installation

See pictures chapter A Set-up, page 3.
On initial delivery check the delivery
package of the trolley for completeness and
that the parts are intact
1� 5 castors
2� star base
3� trolley pole
4� jar holder
5� handle
Activating/deactivating the brakes

4 Before use

Perform the following safety checks
– Examine the trolley for obvious damage or safety defects before use�
– Prior to any use examine all accessories and replace if necessary:
– suction jars, lids change over valves and liners for cracks, brittle and flawed spots
– tubing for cracks and brittle areas
– Make sure that connectors are firmly attached�
As a system check, evacuate the complete system (including jars) at maximum vacuum before
actual use� This enables you to confirm the set-up is tight�
CAUTION
The trolley must remain in an upright position during use�
To activate, press
lever down�
Assembling steps
1� Attach castors to star base�
2� Attach pole� Screw thread is facing up�
3� Attach jar holder�
4� Secure jar holder with handle�
Description and installation/Before use
To deactivate, press
lever up�
| 11