Tristar FR-6970 Manual De Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
Instruction manual
Note: When cooking in both baskets simultaneously, it is
advisable to cook similar foods for which the desired heating
temperatures would not vary more than 20°C.
Remove the empty basket(s) from the Aerofryer.
If needed, place the crisping trays in the baskets.
Place the food in either or both of the baskets and slide the
baskets back into the Aerofryer.
Note: Do not overfill. To ensure proper cooking and air
circulation, NEVER fill any Aerofryer basket more than 2/3 full.
Touch the ON/STANDBY icon. The appliance will beep once, the
control panel will illuminate and the Basket 1 icon will flash
repeatedly.
Program the Baskets by using a suitable pre-set cooking program
or use manual programming of the cooking time and temperature.
Using a pre-set program
Select Basket 1 by touching the Basket 1 icon.
Choose 1 of the 8 pre-set programs for Basket 1 by touching the
MODE icon repeatedly until the icon of the desired cooking pre-
set flashes.
If desired, you can adjust the pre-set time and temperature of
Basket 1 by using the Time Up/Down and Temperature Up/Down
icons.
Basket 2 will use the same time and temperature settings as
Basket 1, however the time for Basket 2 can be manually
adjusted to end earlier or later than Basket 1. Only 1 temperature
can be set when using both baskets at the same time.
8
If desired, touch the Basket 2 icon then use the Time UP/DOWN
icons to adjust the time for Basket 2.
Touch the START/PAUSE icon to start the operation. The "in
operation" indicators will run, the temperature and time left will be
displayed alternatively in the displays.
When the operation is complete the appliance will beep 5 times,
the ON/ STANDBY icon will illuminate and the fan will continue
running for 20 seconds to cool down the appliance.
Remove the food from the baskets, unplug the appliance and
allow it to cool down for 30 minutes before cleaning.
Manual programming of the Time and Temperature
Program the time and temperature for Basket 1 by using the Time
UP/DOWN and Temperature UP/DOWN icons.
Basket 2 will use the same time and temperature settings as
Basket 1, however the time for Basket 2 can be manually
adjusted to end earlier or later than Basket 1. Only 1 temperature
can be set when using both baskets at the same time.
If desired, touch the Basket 2 icon then use the Time UP/DOWN
icons to adjust the time for Basket 2.
Touch the START/PAUSE icon to start the operation. The "in
operation" indicators will flash, the temperature and time left will
be displayed alternatively in the displays.
When the operation is complete the appliance will beep 5 times,
the ON/ STANDBY icon will illuminate and the fan will continue
running for 20 seconds to cool down the appliance.
Remove the food from the baskets, unplug the appliance and
allow it to cool down for 30 minutes before cleaning.

Publicidad

Tabla de contenido
loading

Tabla de contenido