Changing The Saw Chain - Mafell ZSX Ec Instrucciones De Funcionamiento Y Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ZSX Ec

4.3 Changing the saw chain

Use the following procedure to change the saw
chain:
1.
Pull out the power plug of the machine.
2.
Put down the cable where you can see it.
3.
Open the spring-loaded lower protective flap
(11) downward.
4.
Using the combination screwdriver (B), turn
the fillister head screw (10) counterclockwise
to loosen it.
5.
Open the cover and remove it.
02/2022
Caution
Risk of injury from a stopped saw chain
The saw chain is sharp. You can hurt yourself when you change the saw chain.
Be careful when you change the saw chain.
Wear protective gloves when you change the saw chain.
Fig. 3: Opening the protective flap
Fig. 4: Removing the cover
13

Publicidad

Tabla de contenido
loading

Tabla de contenido