Installing The Shoulder Strap - Chapin 61900 Manual De Uso Y Cuidado

WAND ASSEMBLY
1. Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve.
2. Turn and tighten the retaining nut clock-wise onto the shut-off valve.
Retaining
INSTALLING THE PUMP HANDLE
The pump handle can be mounted on either side of the pump shaft (A). To
install the pump handle place the handle (C) over the shaft (A) aligning the
pump handle holes and shaft holes. Slide the bolts (B) through the aligned
holes as shown in figure 3. Tighten nuts (D) to bolts. There are holes in the
pump handle to allow for either left (fig.2-4) or right (fig.5) hand mounting.
Nylon Lock Nut
Threaded Bolt
Figure 1
Figure 4
Tighten nut to bolt

INSTALLING THE SHOULDER STRAP

The backpack strap is provided with multiple
features including shoulder strap, chest strap,
waist belt and lumbar support. (figure 1). The
top the shoulder strap is attached to the top of
the tank and is removable. The hook from the
lumbar support attaches to the base tube on
the bottom of the tank (figure 2).
Wand
Nut
Pump
Handle
Figure 2
Line up holes
Figure 5
Right Hand
Chapin Backpack Sprayer Operator's Manual - English
O-ring
Pump
Shaft
Figure 1
Strap Assembly
3E
Shut-off
Valve
A. Pump Shaft
D. Nuts
C. Pump Handle
Figure 3
Slide bolts through holes
Completed Assembly
Hook
Shoulder
Strap
Chest
Strap
Lumbar
Support
Waist
Figure 2
Belt
Hook Attachment
B. Bolts
Lumbar
Support
Base
Tube