General Information - Infiniton HQP-W33 Manual De Usuario

GENERAL INFORMATION

- Before performing any operation, read the following instructions carefully. KEEP THIS BOOKLET IN A SAFE PLACE FOR
LATER REFERENCE.
- After removing the packaging, make sure that the appliance is in good condition. If in doubt, do not use the appliance and
return it to your dealer.
- The packaging materials contain plastics, staples, etc. which may be dangerous and should therefore not be left within the
reach of children.
ELECTRICAL CONNECTION
- Before connecting the appliance, make sure that the specifications on the rating plate correspond to the mains conditions.
- The electrical safety of this appliance can only be guaranteed if it has been correctly earthed.
This appliance conforms to the EMC directives 89/336/EEC relating to electromagnetic integrity.
WARNING
We strongly recommend that the electrical installation is carried out by qualified professional personnel.
- Do not install the appliance near bathtubs, showers, washbasins, swimming pools, etc.
- This appliance must only be used for the purpose intended by the manufacturer, i.e. space heating. Any other use is
inappropriate and therefore dangerous. The manufacturer accepts no liability for damage caused by improper and
unreasonable use of this appliance.
- DO NOT PLACE A COVER OVER THE APPLIANCE, AS THE COVER MAY CATCH FIRE DURING USE.
- Do not attach accessories or equipment not intended by the manufacturer.
- Incorrect installation may cause damage to people, animals or objects and the appliance must not be used in an enclosed
area.
- Install the appliance in a horizontal position only.
- Do not install the appliance under a fixed light or power supply.
- Avoid installation behind a door.
- The heater must not be used by inexperienced persons without computer skills. If they need to use it, they must be
supervised and know how to use it.
INSTALLATION
- Keep an adequate distance between the appliance and walls and objects. Minimum conditions:
- Whenever the appliance is installed in a bathroom, it is necessary to maintain the required safety zone around the
appliance.
- Do not install the appliance in such a way that the heat rays fall directly on adjacent walls or objects.
- For installation on a wall, proceed as follows:
How to fix the appliance to the wall
o+- 117mlll--+Ü
4
4 1mm
o
o
- Heaters that are mounted high up must be installed at least 1.5 m above the floor.
- Use the screws provided in the wall, as in the picture above.
- Attach the rear bracket of the heater with the screw.
USE INSRTUCTIONS
- - Connect the mains plug to the mains
- - To switch on the appliance, press the switch.
- (0):Off; (1):600W ; (2)=1200W
- If you notice slight vibrations when switching on the appliance, which gradually fade away, do not despair. This
is part of the normal operation of this appliance.