Technical Specifications; Correct Usage - Rupes HSE73 Manual De Instrucciones

WARNING: To reduce the risk of injury, user must
A
n0
Do not dispose this product with household rubbish
Li-Ion

TECHNICAL SPECIFICATIONS

TYPE
Voltage D.C. [V]
R.P.M.
Electronic speed control
Battery life [min]
Ø Orbit [mm]
Pad shape
Sanding pad dimensions [mm]
Self generated dust extraction
Weight [Kg]
* The value is referred to a use of the battery pack 9HB180LT, fully charged with the charger 9HC180LT.
** measured without the functional units: battery pack or power supply.

CORRECT USAGE

• This tool is designed to be used as a sander. Types HSE73 and HSS73 are orbital sanders, type
HSR73 is a random orbit sander.
• This tool is not intended to be used for metal brushing, polishing and cutting operations. The use of
this tool for unintended applications may cause hazards and injuries to people.
• Keep bystanders a safe distance away from work area. Anyone entering the work area must wear
personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause
injury beyond immediate area of operation.
• Hold power tool by insulated surfaces only, when performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and shock the operator.
• Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and
your hand or arm may be pulled into the spinning accessory.
• Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory
may grab the surface and pull the power tool out of your control.
• Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could
snag your clothing, pulling the accessory into your body.
• Regularly clean the power tool's air vents. The motor's fan will draw the dust inside the housing and excessive
accumulation of powdered metal may cause electrical hazards.
• The tool must be used with accessories that have been specifically designed or recommended by the
manufacturer. The fixing of the accessory to the tool does not guarantee a safe operation.
6
Summary of device labels containing safety information
read instruction manual
Wear ear protection
Wear eye protection
Ampere
No-load speed
Product contains Lithium-Ion.
7000 ÷ 11000
Rectangular
80x130
V
/min
HSE73
18
•
~45*
2
•
1,0**
CE mark for EU market
Wear gloves
Wear a mask
Volt Direct Current
Per minute
Disposal of decommissioned
(WEEE Directive)
HSR73
18
7000 ÷ 11000
•
~45*
2
Circular
Ø125
•
1,0**
HSS73
18
7000 ÷ 11000
•
~45*
2
Delta
-
•
1,0**