Technical Specifications; Correct Usage - Rupes HR81M Traducción Del Manual De Instrucciones Original

ENGLISH
WARNING: To reduce the risk of injury, user must read instruction manual
CE mark for EU market
Wear ear protection
Wear eye protection
Disposal of decommissioned
(WEEE Directive)
Eurasian conformity mark
Wh Watt per hour
n0 No-load speed
Arrow – act in the direction indicated by the arrow direction

TECHNICAL SPECIFICATIONS

TYPE
Voltage (VDC)
RPM *
Battery life (min)
Charging time (min)
Electronic speed control
Overcurrent protection
Soft start
LED indication
Dimensions (mm)
Weight (g)
* 2000 RPM when speed regulation Knob (2) is at position 1, 2800RPM at position 2, 3500RPM at position 3, 4300RPM at
position 4, 5000 RPM at position 5.
** The value is referred to a use of the battery pack 9HB125LT/9HB120LT, fully charged with a charger 9HC120LT and normal use
with a Rupes polishers HR81M/HR81ML and functional unit orbit 12mm and Ø30mm buffer pad.
*** Measured without a functional unit, battery pack, and power supply.
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference. The safety and accident prevention instructions are reported in the "SAFETY INSTRUCTION"
booklet which is an integral part of these documents. This operating instructions manual indicates the additional information
required for the specific use of the tool.

CORRECT USAGE

CAUTION: DO NOT PUSH SHAFT LOCKING BUTTON (6) DURING USE! PUSH THE BUTTON ONLY WHEN THE
SWITCH (2) IS IN OFF POSITION
Safety instructions for all operations
• This tool is designed to be used as a polisher, sander, cleaner, brusher.
• This tool is not intended to be used for metal brushing and cutting-off operations. The use of this tool for unintended
applications may cause hazards and injuries to people.
• The tool must be used with accessories that have been specifically designed or recommended by the manufacturer. The
fixing of the accessory to the tool does not guarantee a safe operation.
• The rated speed of the accessories must be at least equivalent to the maximum speed specified on the tool. Using the
accessories at speeds above the rated one, may cause them to break or thrown into the air.
• The external diameter and thickness of the accessories must match the specifications of the tool. Accessories with
incorrect dimensions cannot be adequately protected or controlled.
• The configuration of accessories must match the tool. The use of accessories that cannot be perfectly fitted on the tool may
result in imbalance, excessive vibrations and in the impossibility of controlling the tool.
8
Summary of device labels containing safety information
Direct current
Wear a gloves
Wear a mask
Product contains Lithium-Ion
Do not dispose this product with household rubbish
Li-Ion
Ah Ampere per hour
V Volt
/min Per minute
HR81M
10.8/12
2000-5000*
~30**
~20**
•
•
•
•
287x70x47***
470***
HR81ML
10.8/12
2000-5000*
~30**
~20**
•
•
•
•
332x70x47***
520***