Using The Appliance - Kingfisher CLBH60ASBL Manual De Instrucciones

SENSOR USE
Calibration data is stored in memory in the event of a power cut, and this process can be repeated at any
time However, if calibration has not finished correctly or has not been run, the hood cannot operate in
Automatic Mode anc "E.C" will be displayed for five seconds.
The Air Sense Status control icon will flash white but the hood can still be used in Manual Mode if required
until calibratior is completed.
AIR SENSOR STATUS
Once calibration is completed, the Air Sense Status icon will change colour and motor speed to reflect
changes in the ambient conditions in your kitchen.
AIR SENSE STATUS
Green
Green
Green
Amber
Amber
Red
Red
EXTRACTION OPTIONS
Ducted Option A / Recirculation Option B
To change the extraction mode:
• Press and hold the Fan Speed Down control
until all icons start to flash to enter Set Up Mode.
• Touch the Timer control
show the factory default Ducted setting
• Touch the Fan Speed Down control
Ducted option A (extraction to the outside)
Recirculation option B (no extraction to the outside)
• Touch the Timer control
• Press and hold the Fan Speed Down control
seconds to exit Set Up Mode, or this will exit automatically after thirty seconds.

02 Using the appliance

NORMAL USE
If calibration has been completed the cooker hood can run in Manual Mode or Automatic Mode.
Manual Mode
• The icons On/Off
• The Air Sense Status icon
The Light and Timer
• The display will show the motor speed from off as "S.O" up to boost as "S.P".
Automatic Mode
• The icons On/Off
• The Air Sense Status icon
kitchen.
5059340445953_MNL_IN_V04.indb 71 5059340445953_MNL_IN_V04.indb 71
COOKING FUMES DETECTED
NEGLIGIBLE
VERY LOW
MODERATE
ABOVE AVERAGE
VERY HIGH
briefly and the icon will be lit red with all other icons flashing. The display will
.
or Fan Speed Up control
to store the setting and return to Set Up Mode.
, Fan Speed Down and Fan Speed Up
be white, green, amber or red based upon the air quality in your kitchen.
be white or red.
.Fan Speed Down , Fan Speed Up
will be white, green, amber or red based upon the air quality in your
LOW
HIGH
and Fan Speed Up control
to change the air outlet mode.
and Fan Speed Up control
are lit white in this mode.
and Timer
71
MOTOR SPEED
0
1
2
3
4
5
P (Boost)
together for two seconds
together again for two
are lit white in this mode.
09-06-2022 14:31:37 09-06-2022 14:31:37