Symbols; Safety Warnings; Further Safety Instructions - Festool ETS EC 125/3 EQ Manual De Instrucciones

English
Contents
1 Symbols..................................................... 12
2 Safety warnings.........................................12
3 Intended use..............................................13
4 Technical data........................................... 13
5 Parts of the device.....................................14
6 Operation................................................... 14
7 Settings......................................................14
8 Working with the machine........................ 15
9 Service and maintenance..........................15
10 Accessories............................................... 16
11 Environment.............................................. 16
12 General information.................................. 16
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Connecting the mains power cable
Disconnecting the mains power cable
Do not dispose of it with domestic
waste.
Safety class II
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Tool contains a chip which stores data.
See section 12.1
Tip or advice
Handling instruction
12
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2

Further safety instructions

-
Wear suitable personal protective equip­
ment: Ear protection, safety goggles, a dust
mask for work that generates dust.
- Wear suitable breathing protection to pro­
tect your health. In enclosed spaces, en­
sure that there is sufficient ventilation and
connect a mobile dust extractor.
Harmful/poisonous dust may be produced
-
when working (e.g. paint products con­
taining lead and some types of wood).
Contact with or inhalation of this dust may
pose a risk for the operating personnel or
persons in the vicinity. Comply with the
safety regulations that apply in your coun­
try. Connect the power tool to a suitable
dust extractor.
Use a residual-current circuit break­
-
er (RCCB) or an isolating transformer if
operation of the power tool in a damp en­
vironment cannot be avoided. In the event
of an electric shock, the residual-current
circuit breaker (RCCB) or isolating trans­
former protects you against life-threaten­
ing current through the body.
Attention: Risk of fire! Avoid overheating
-
the grinding material and the sander. Al­
ways empty the dust container before tak­
ing a break. Swarf in the dust bag, microfil­
ter, paper bag (or in the filter bag or filter
of the mobile dust extractor) may sponta­
neously combust in unfavourable condi­
tions such as flying sparks when sanding
metals. Particular danger exists if the
swarf is mixed with paint, polyurethane
residue or other chemical materials and
the grinding material is hot after long peri­
ods of work.