Tabla De Contenido; About This Manual; Symbols; Safety Warnings - Festool PLANEX LHS 2 225 EQI Manual De Instrucciones Original

English
Contents
1 About this manual....................................... 6
2 Symbols....................................................... 6
3 Safety warnings...........................................6
4 Intended use................................................9
5 Technical data............................................. 9
6 Functional description.............................. 10
7 Commissioning..........................................10
8 Settings......................................................12
9 Working with the electric power tool........16
10 Service and maintenance..........................18
11 Accessories............................................... 19
12 Environment.............................................. 19
13 General information.................................. 20
14 Troubleshooting........................................ 21
1

About this manual

Save these instructions
It is important for you to read and understand
this manual. The information it contains relates
to protecting your safety and preventing prob­
lems. The symbols below are used to help you
recognize this information.
DANGER Description of imminent
hazard and failure to avoid
hazard will result in death.
WARN­ Description of hazard and
ING possible resulting injures
or death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE Description of possible
damage of the device or its
surroundings.
2

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
6
Pull out the mains plug
Connecting the mains power cable
Disconnecting the mains power cable
CAUTION! Do not look directly into the
light beam!
Safety class II
Tool contains a chip which stores data.
See section 13.1
Tip or advice
Handling instruction
Hz hertz
W watt
V volt
~
alternating current
a.c.
n
no load speed
0
rpm
revolutions per minute
min -1
lb. pound
kg kilogram
diameter
mm millimetre
m metre
" inch
3

Safety warnings

3.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a. Keep work area clean and well lit. Clut­
tered or dark areas invite accidents.