Overview; Water Pump - Stihl WP 600.0 Manual De Instrucciones

English
3

Overview

3.1

Water Pump

1 Spark plug socket
The spark plug socket connects the ignition
lead to the spark plug.
2 Muffler
The muffler reduces the water pump's noise
level.
3 Frame
The frame is used to protect and transport the
water pump.
4 Fuel tank cap
The fuel tank cap seals the fuel tank.
5 Starter handle
The starter handle is used to start the engine.
6 Throttle lever
The throttle lever is used to adjust the engine
speed.
7 Choke lever
The choke lever is used for starting the
engine.
8 Fuel cock
The fuel cock shuts off the fuel feed.
9 Screw plug
The screw plug seals the opening for adding
water.
10 Screw plug
The screw plug seals the opening for draining
water.
11 Front engine oil cap
The engine oil cap seals the opening for add‐
ing engine oil.
18
12 Rear engine oil cap
The engine oil cap seals the opening for
checking the oil level.
13 Main switch
The main switch is used to switch on and stop
the engine.
14 Suction opening
The suction opening is used to connect the
suction hose.
15 Outlet opening
The outlet opening is used to connect the
pressure hose.
# Rating plate with machine number
3.2 Components for Connecting
the Hoses
1 Connecting piece
The connecting piece is used to connect a
hose.
2 Seal
The seal seals the connecting piece.
3 Union nut
The union nut secures the connecting piece
to the water pump.
4 Clamp
The clamp secures a hose to the connecting
piece.
5 Suction strainer
The suction strainer filters the water taken in.
3.3 Symbols
The symbols can be on the water pump, the
engine or the oil filler neck and have the follow‐
ing meaning:
The fuel cock is opened and
closed by moving the lever.
The choke lever must be acti‐
vated when starting a cold
engine.
3 Overview
0478-701-9906-C