Operator Responsibilities; Safety Information - Wilo Yonos MAXO-D Instrucciones De Instalación Y Funcionamiento

en
3.3

Operator responsibilities

Operators must:
ƒ
Provide the installation and operating instructions in a lan-
guage which the personnel can understand.
ƒ
Have all work carried out by qualified personnel only.
ƒ
Make sure that personnel are suitably trained for the specified
work.
ƒ
Train personnel with regard to the operating principles of the
system.
ƒ
Provide the necessary protective equipment and make sure
that personnel wear it.
ƒ
Eliminate any risk from electrical current.
ƒ
Equip hazardous components (extremely cold, extremely hot,
rotating, etc.) with an on-site guard.
ƒ
Have defective gaskets and connection cables replaced.
ƒ
Keep highly flammable materials at a safe distance from the
product.
All information that appears on the product must be followed and
kept permanently legible:
ƒ
Warning and hazard notices
ƒ
Rating plate
ƒ
Direction of flow symbol
ƒ
Labelling of connections
This device can be used by children from 8 years of age as well as
people with reduced physical, sensory or mental capacities or lack
of experience and knowledge if they are supervised or instructed on
the safe use of the device and they understand the dangers that
can occur. Children are not allowed to play with the device. Clean-
22
ing and user maintenance must not be carried out by children
without supervision.
3.4

Safety information

This section contains basic information which must be adhered to
during installation, operation and maintenance. Failure to follow the
installation and operating instructions will result in injuries to per-
sons, damage to the environment and the device and result in the
loss of any claims for damages. Failure to follow the instructions
will, for example, result in the following risks:
ƒ
Injury to persons from electrical, mechanical and bacteriolo-
gical factors as well as electromagnetic fields
ƒ
Environmental damage from leakage of hazardous substances
ƒ
Damage to property
ƒ
Failure of important product functions
ƒ
Failure of required maintenance and repair procedures
The directions and safety instructions in the other sections must
also be observed!
WILO SE 2022-03