cecotec BAKE&FRY 1400 TOUCH STEEL Manual De Instrucciones página 42

ENGLISH
- Do not use metallic or abrasive products. Use a soft, damp cloth to clean the device's
surface.
- Do not immerse the appliance in water or other liquid.
- Do not use abrasive cleaners or scouring pads to clean the product.
- Use a soft, damp cloth to clean the product's surface. You can use a non-abrasive liquid
detergent or a mild spray solution to prevent stains from building up. Apply the cleaning
product to the sponge and not to the device surface directly.
- To clean the glass door, use a glass cleaner or mild detergent and a damp sponge or soft
plastic scouring pad. Do not use abrasive products or metallic scouring pads, as they may
scratch the surface of the device.
- Clean the LED display with a soft and wet cloth. Apply the cleaning product to the cloth,
do not apply it directly to the LED display. Cleaning the LED display with a soft or abrasive
cloth could scratch it.
Inside cleaning
To clean any splashes that may occur during cooking processes, use a soft, damp sponge to
wipe the walls. You can use a non-abrasive liquid detergent or a mild spray solution to prevent
stains from building up. Apply the cleaning product to the sponge and not the inside directly.
Warning
Extreme caution when cleaning the resistors to avoid damaging it. Allow the device to cool
down completely and then carefully rub a soft, damp sponge or cloth along the resistors. Do
not use any type of cleaning product or detergent. Allow all surfaces to dry thoroughly before
connecting the power cord to the power outlet and turning on the device.
Cleaning the fat-drip tray
- After every use, remove the fat-drip tray and wash it. Use a damp sponge to remove
crumbs or excess fat in the tray. You can use a non-abrasive liquid detergent or a mild
spray solution to prevent stains from building up. Apply the cleaning product to the sponge
and not the inside directly. Dry it properly.
- To get rid of fat, soak the tray in soapy water and wash it with a sponge or soft plastic
scouring pad. Rinse and dry thoroughly.
- Always make sure to insert the fat-drip tray back into the device after cleaning and before
connecting the power cord to the mains socket or switching on the device.
Cleaning the oven rack and the fryer tray
- Wash all accessories in warm soapy water and use a sponge or soft plastic scouring pad.
Rinse and dry thoroughly.
- Do not use abrasive cleaners, scouring pads or metal utensils to clean any of the
accessories, as this may damage the surface.
BAKE&FRY 1400 TOUCH STEEL
42