Technical Specifications - cecotec BAKE&FRY 1400 TOUCH STEEL Manual De Instrucciones

ENGLISH
Food cooked in the oven is
raw
Some ingredients are fried
unevenly.
Food is not crispy after
cooking in the air fryer.
Display shows the error code
"E1"
Display shows the error code
"E2"

6. TECHNICAL SPECIFICATIONS

Product name: Bake&Fry 1400 Touch Steel
Reference: 02257
Power: 1800 W
Voltage and frequency: 220-240 V~, 50/60 Hz
Volume: 14L
Exterior dimensions: 33.5 x 35.2 x 38 cm (height x width x depth)
Interior dimensions: 26 x 27.1 x 20 cm (height x width x depth).
Temperature range: 50ºC-230 ºC. Temperature increases and decreases in 10ºC to 10ºC
intervals.
Time range: 1 min-120 hours. Time increases and decreases minute by minute.
Made in China | Designed in Spain
BAKE&FRY 1400 TOUCH STEEL
44
There is too much food inside
the oven.
Temperature is too low or
there is little time set.
You have selected the wrong
function.
Food is stacked or very close
to each other during cooking.
The position of the oven tray,
air fryer basket or oven rack
has not been adjusted.
Food with high
water level.
Short-circuit in the
temperature control.
Temperature control or
resistors are not working
Do not introduce as many
food in the oven at once.
Set a higher temperature or
set more time.
Make sure you select the
correct function.
Make sure to distribute the
ingredients evenly.
Introduce the desired tray
in the correct position. Be
careful, these accessories can
be very hot.
Spraying or brushing a
small amount of oil on food
can help to achieve crispier
results.
Unplug the cord from the
power supply. Contact the
official Technical Support
Service of Cecotec.
Unplug the cord from the
power supply, plug it again
and turn it on. If the problem
persists, contact the Technical
Support Service of Cecotec.