Fluorescence Observation Procedures (B-510Fl); Fluorescence Observation Procedures (B-510Ld Series) - Optika B-510 Serie Manual De Instrucciones

13. Fluorescence observation procedures (B-510FL)

Set the power supply switch to "I" (ON) and
wait for the arc to stabilize (5 or 10 minutes).
Place a specimen on the stage.
Insert in the light path the filtercube
suitable for the specimen
Insert the objective into the light path
and focus the specimen.
Adjust until you obtain a bright and even field of view
Insert the shutter when the microscope is

14. Fluorescence observation procedures (B-510LD series)

Turn on the illuminator main switch and adjust light intensity
Place a specimen on the stage.
Insert in the light path the filtercube
suitable for the specimen
Insert the objective into the light path
and focus the specimen.
not used for a short time
Begin observation
Begin observation
(Used commands)
Fluorescence power supply
Slide holder
Fluorescence filter slider
Shutter
Nosepiece
Coarse and fine focusing knobs
Lamp housing focussing and centering
screws
Shutter
(Used commands)
Main switch
Light intensity adjustment knob
Slide holder
Fluorescence filter slider
Nosepiece
Coarse and fine focusing knobs
Page 48
(Chapter)
15
10
15
15
7
7
15
15
(Chapter)
10
15
10
15
7
7