B-510-2/B-510-2F/B-510-3/B-510 - Optika B-510 Serie Manual De Instrucciones

8.2

B-510-2/B-510-2F/B-510-3/B-510-5

1. Place the splitter attachment of the multi-discussion system
and tighten the lock screw ① on the right side of the frame.
(Fig. 5)
2. Connect the 5Vdc power supply to the rear socket of the
splitter attachment. (Fig. 6).
3. Connect the first part of the extension tube to the optical
splitter. Insert the tube into the splitter all the way down and
screw on the black sealing ring completely. (Fig. 7-8).
• Every connection is labeled with a letter printed on both
sides of the connection. Make sure to match the letters
in order to correctly assemble the microscope.
Page 24
①
F ig. 5 F ig. 5
F ig. 6 F ig. 6
F F ig. 7 ig. 7
F ig. 8 F ig. 8