Metabo HPT DS 18DC Instrucciones De Seguridad Y Manual De Instrucciones página 10

English
SPECIFICATIONS
1. Cordless Driver Drill / Cordless Hammer Drill
Model
Motor
Low
No-load
speed
High
Low
No-load
impact rate
High
Drilling
Capacity
Screw Driver
Drill chuck capacity
Model
Battery
Type
Voltage
Weight
*1 Brick: Depth 1-1/4 in. (30 mm)
Wood: Thickness 1-1/2 in. (38 mm)
Metal: Thickness 1/16 in. (1.6 mm)
DV36DC only: Existing batteries (BSL3660/3626/3620, BSL18xx and BSL14xx series, etc.) cannot be used with this
tool. Use multi volt type battery.
2. Battery Charger
Model
Input power source
Charging time
(At a temperature of 68°F (20°C))
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
10
Brick *1 —————
Wood *1
(Soft Wood)
Metal *1
(Mild Steel)
Wood screw
Small screw
DS18DC DV18DC
DC Brushless motor
0–500 /min
0–2,000 /min
0–7,500 /min
0–30,000 /min
3/4 in. (20 mm)
4 in. (102 mm)
5/8 in. (16 mm)
7/16 in. × 4 in.
(12 mm × 100 mm)
1/4 in. (6 mm)
Maximum gripping diameter 1/2 in. (13 mm)
BSL36A18
Li-ion battery
DC 36 V / 18 V
6.2 lbs. (2.8 kg) (BSL36A18 and side handle attached)
UC18YSL3
Single phase: AC 120 V 60 Hz
BSL36A18 : Approx. 32 min
DC 14.4–18 V
DC 8.0 A
1.3 lbs. (0.6 kg)
DV36DC
0–550 /min
0–2,200 /min
0–8,250 /min
0–33,000 /min
7/8 in. (22 mm)
4-5/8 in. (118 mm)
3/4 in. (20 mm)
5/8 in. × 4 in.
(16 mm × 100 mm)