Supplied Components; Operating Instructions; Switch On And Off - Flex MS 1706 FR Instrucciones De Funcionamiento

MS 1706 FR

Supplied components

Wall chaser MS 1706 FR
2 diamond cutting discs Ø 5½"/140 mm
(part no.: 334.472)
1 SDS-Clic quick-release clamping nut
(part no.: 253.049)
2 clamping flanges (part no.: 191.612)
5 distance washers 5 mm
(part no.: 318.914)
1 adapter for dust extractor 32/28 mm
(part no.: 327.026)
1 web remover (part no.: 229.253)
1 Plastic carrying case
(part no.: 327.034)
1 operating manual (part no. 334.944)

Operating instructions

DANGER
Before performing any work on the
power tool, pull out the mains plug!
Before switching on the wall
chaser
– Unpack the wall chaser and check
that no parts are missing or
damaged.

Switch on and off

CAUTION
Following a power failure, the switched-
on machine will start running again.
– Press the switch (9.) and push
forwards.
– Lock the switch by depressing it at
the front.
– To switch off the wall chaser, release
the switch by pressing it at the back.
Changing the cutting discs/
changing the groove width
DANGER
Before performing any work on the wall
chaser, pull out the mains plug.
Use only cutting discs with max.
diameter 5½"/140 mm.
Instruction manual
9