Filling with Petrol
Warning! Petrol is flammable
and hazardous to health:
- Keep petrol in containers in-
tended for this purpose;
- Only refuel outdoors and never
with the engine running or when
the machine is hot;
- Open the filler cap carefully to
allow excess pressure to es-
cape;
- Do not smoke whilst refuelling;
- Avoid skin contact and inhala-
tion of the fumes;
- Remove spilt petrol;
- Keep petrol away from sparks,
open flames and other ignition
sources;
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates
1. Unscrew the filler cap (
in the petrol to the lower edge of the
filler.
Do not fill the tank entirely, to allow
the petrol room to expand.
2. Wipe away petrol residues around the
filler cap and close the filler cap.
Setting the Cutting Height
The equipment has 6 positions for setting
the cutting heigh (25-75 mm):
1. Pull the lever (18) outwards and
push it to the desired position .
2. Push the lever back in.
The correct cutting height is around
25 – 45 mm for an ornamental lawn and
around 40 – 65 mm for a utility lawn.
Adjust front wheels
The lawn mower is extremely flexible and
manoeuvrable thanks to the special con-
struction of the front wheels.
These are to be adjusted according to the
specific situation as follows:
7) and pour
Operation
Starting and Stopping the
Engine
Select a greater cutting height for
the first cut of the season.
1. The alignment of the wheel is
fixed once the clamping brackets
(29) snaps into place. If the wheel
is desired in another running
direction, lift clamping bracket to
release it. Bring wheel into new
position and clamping brackets
snaps into place once again.
2. Should the front wheels remain
able to move freely, lift the clamp-
ing brackets (29) and do not
place them in the opening, but
rather set them on the plate be-
side it.
Observe noise control and local
regulations.
Warning! Petrol is flammable.
Start the engine at least 3 m
away from the filling location.
GB
87